3D Printer Parts and Accessories

          Considerations    Increasing heatbed temperature enhances adhesion. Users need to adjust the temperature of the heatbed based on their specific requirements in order to achieve the most suitable level of adhesion. Deposition of dust and grease on the build...

       

 

Strain relief for the Artillery Sidewinder X-1s 20 pin ribbon cable. This strain reliver will help secure the 20 pin cable into the extruders PCB. All hardware and mounting screws are included.

Replacement pin for the Artillery ABL sensor. For Artillery Genius Pro and the Sidewinder X-2.

Overview The AMS Hub is used to expand the number of AMS connected to Bambu X1/P1 series printers from 1 AMS unit(4 channels) to a maximum of 4 AMS units(16 channels) to improve the refueling speed across your multiple AMS units and support the...

Product Description Advantage: No more 3M Masking tape No more glue stic No more ABS juice No more PEI sheet replacement Easy to print Easy to remove by bending and popping it off Easy to maintain Double-sided Lower runing cost especially for printing farm...

Overview The AMS interface board is a circuit board that provides 24V power and also handles communication between the AMS and the printer. Installation Installation Procedure. In the Box - AMS Connector Board*1 Compatibility Works with Bambu Lab AMS

One side: Bambu High-Temperature Plate = High-Temp sheet + Bambu Engineering Plate
 The other side: Bambu Engineering Plate 1.Bambu High-Temperature Plate Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements Material Heatbed Temperature Glue...

A magnetic purge receptacle for Bambu filament 3-d printed

0.6mm and 0.8mm NozzleFaster Print Speed Larger diameter extrudes more filaments per second, resulting in faster print speed

Friendly hobbies0.2mm 3D Printer Stainless Steel Nozzle -Compatible with E3D Volcano These stainless steel nozzles are a great upgrade from the standard brass nozzles that are installed on most 3D printers. An absolute must if you do a lot of printing with abrasives like...